New
Low in Stock
Sold Out

Grand Basic Air Magic Living House WXL-AI

71805532
Please select the product option(s)
SKU# 71805532
Easy setup in about 8 minutes with an air pump! Enjoy a spacious, ultra-large luxurious space.

Large tents are appealing for their livability and capacity, but they often require a significant amount of time and effort to set up.

The solution LOGOS has arrived at is "air."

The "Gran Basic Air Magic Living House WXL-AI" is an air tent that uses air tubes instead of traditional frames to stand up.

With just a dedicated pump to inflate the air tubes, it can be set up in about 8 minutes.

Of course, it also boasts sufficient strength.

By incorporating a beam-type tube vertically among the four horizontal tubes, it effectively handles lateral swaying.

This is LOGOS' next-generation standard tent that balances capacity with quick setup.

Easy setup in about 8 minutes with air injection.

Setting up is as simple as using the dedicated pump to inflate air in just one spot.

There’s no need for the hassle of assembling frames like traditional tents. Plus, it offers sufficient strength.

Thanks to our unique system, the injected air serves as the frame.

*Please set up with at least two people.

[Guidelines for air injection using the included manual pump]

When the tube is about 90% inflated, please press down with your finger while continuing to add air.

Once you can no longer press down with your finger, you’re done. (Recommended psi value: 5-6 psi)

Be careful not to overinflate, as this may lead to damage.

[POINT]

If the tube is bent, air cannot be injected properly.

While one person is inflating, another should lift the roof from the inside.

An ultra-large living space perfect for relaxing with a big group.

Secure a spacious living area. Perfect for family camping and group camping.

Beam-type air tube that enhances wind resistance.

By passing a beam-shaped tube vertically through four horizontal tubes, the strength of the tent is enhanced, significantly reducing swaying.

Prevents air leakage even in the unlikely event.

Equipped with the "TUBE DIVIDED SYSTEM" that prevents air leakage. Even if the tube were to rupture, it prevents the entire tent from collapsing.

Can also be used as a large screen tent.

By removing the detachable inner tent, it can also be used as a large screen tarp.

Hanging Inner Tent

The hanging inner tent can be easily attached and detached.

A more spacious living area with front and rear canopies.

The front and rear flies can be converted into an upright canopy, further expanding the spacious living area.

*Please note that the rear canopy pole is sold separately.

*Do not use in canopy mode during rainy weather.

Versatile ventilation that excels in air circulation.

The flysheet and inner tent are equipped with two ventilation openings at the top and bottom, promoting air circulation.

Window-type ventilation on the back of the tent.

The tent features window-style ventilation on the back, promoting air circulation.

The inner tent comes with mesh pockets.

The inner tent is equipped with four mesh pockets for storing small items.

Compatible with power cords

Equipped with a power cord inlet. With a zipper, it effectively blocks out cold air.

C-Type Door

With the adoption of a C-type door, the door at the back of the inner tent can be rolled up separately from the top and bottom, allowing it to be used as a large ventilation opening.

Includes a dedicated pump.

This product comes with a dedicated pump that can handle both inflating and deflating. It features a double action that allows you to pump air in whether you push or pull, and a single action that lets you inflate air only when pushing. Switching between these modes is easy and can be done with just the lever operation.

With Mud Skirt

Equipped with a full mud skirt to prevent rainwater and insect intrusion.

Convenient storage bag for easy transport.

This product comes with a storage bag that can be opened from both ends, making it easy to store.

Total Weight: (approximately) 28.0 kg
Assembly Time: (approximately) 8 minutes
Storage Size: (approximately) 40 cm (H) × 85 cm (W) × 40 cm (D)
Water Resistance:
[Fly Sheet] 3000 mm
[Floor Sheet] 3000 mm
Components: Fly Sheet (with air tube), Inner Tent, Frame, Canopy Pole, Air Pump, Rope, Storage Bag, Frame Storage Bag, Pegs, Hammer, Small Item Bag
Main Materials:
[Frame] TPU Tube (recommended psi value 5–6 psi), 6061 Aluminum
[Canopy] Steel
[Fly Sheet] Flame-retardant Polyox
[Inner Tent] Poly Taffeta
[Floor Sheet] Heavy Polyox
[Mesh] Polyester
Performance/Features:
[Fly Sheet] Waterproof treatment, dirt-resistant and super water-repellent treatment, flame-retardant treatment, UV-CUT treatment, looped mud skirt, back door, ventilation
[Inner Tent] Breathable water-repellent treatment, electric cord zip, ventilation
[Frame] 6061 Aluminum, TUBE DIVIDED SYSTEM
- Excellent wind resistance with beam-type air tubes
- Comes with a dedicated pump
- Can be used as a screen when the inner tent is removed

Flame-retardant treatment: Complies with U.S. standard CPAI-84
Recommended psi value: The appropriate value may vary depending on weather conditions and altitude, so please use this as a guideline.
*Assembly time is an estimate based on using the included manual pump for air inflation.
*The included pegs and hammer are designed for use in clear, windless, and leveled environments.
If used in adverse weather or uneven conditions, please seek products suitable for those situations.
Easy setup in about 8 minutes with an air pump! Enjoy a spacious, ultra-large luxurious space.

Large tents are appealing for their livability and capacity, but they often require a significant amount of time and effort to set up.

The solution LOGOS has arrived at is "air."

The "Gran Basic Air Magic Living House WXL-AI" is an air tent that uses air tubes instead of traditional frames to stand up.

With just a dedicated pump to inflate the air tubes, it can be set up in about 8 minutes.

Of course, it also boasts sufficient strength.

By incorporating a beam-type tube vertically among the four horizontal tubes, it effectively handles lateral swaying.

This is LOGOS' next-generation standard tent that balances capacity with quick setup.

Easy setup in about 8 minutes with air injection.

Setting up is as simple as using the dedicated pump to inflate air in just one spot.

There’s no need for the hassle of assembling frames like traditional tents. Plus, it offers sufficient strength.

Thanks to our unique system, the injected air serves as the frame.

*Please set up with at least two people.

[Guidelines for air injection using the included manual pump]

When the tube is about 90% inflated, please press down with your finger while continuing to add air.

Once you can no longer press down with your finger, you’re done. (Recommended psi value: 5-6 psi)

Be careful not to overinflate, as this may lead to damage.

[POINT]

If the tube is bent, air cannot be injected properly.

While one person is inflating, another should lift the roof from the inside.

An ultra-large living space perfect for relaxing with a big group.

Secure a spacious living area. Perfect for family camping and group camping.

Beam-type air tube that enhances wind resistance.

By passing a beam-shaped tube vertically through four horizontal tubes, the strength of the tent is enhanced, significantly reducing swaying.

Prevents air leakage even in the unlikely event.

Equipped with the "TUBE DIVIDED SYSTEM" that prevents air leakage. Even if the tube were to rupture, it prevents the entire tent from collapsing.

Can also be used as a large screen tent.

By removing the detachable inner tent, it can also be used as a large screen tarp.

Hanging Inner Tent

The hanging inner tent can be easily attached and detached.

A more spacious living area with front and rear canopies.

The front and rear flies can be converted into an upright canopy, further expanding the spacious living area.

*Please note that the rear canopy pole is sold separately.

*Do not use in canopy mode during rainy weather.

Versatile ventilation that excels in air circulation.

The flysheet and inner tent are equipped with two ventilation openings at the top and bottom, promoting air circulation.

Window-type ventilation on the back of the tent.

The tent features window-style ventilation on the back, promoting air circulation.

The inner tent comes with mesh pockets.

The inner tent is equipped with four mesh pockets for storing small items.

Compatible with power cords

Equipped with a power cord inlet. With a zipper, it effectively blocks out cold air.

C-Type Door

With the adoption of a C-type door, the door at the back of the inner tent can be rolled up separately from the top and bottom, allowing it to be used as a large ventilation opening.

Includes a dedicated pump.

This product comes with a dedicated pump that can handle both inflating and deflating. It features a double action that allows you to pump air in whether you push or pull, and a single action that lets you inflate air only when pushing. Switching between these modes is easy and can be done with just the lever operation.

With Mud Skirt

Equipped with a full mud skirt to prevent rainwater and insect intrusion.

Convenient storage bag for easy transport.

This product comes with a storage bag that can be opened from both ends, making it easy to store.

Total Weight: (approximately) 28.0 kg
Assembly Time: (approximately) 8 minutes
Storage Size: (approximately) 40 cm (H) × 85 cm (W) × 40 cm (D)
Water Resistance:
[Fly Sheet] 3000 mm
[Floor Sheet] 3000 mm
Components: Fly Sheet (with air tube), Inner Tent, Frame, Canopy Pole, Air Pump, Rope, Storage Bag, Frame Storage Bag, Pegs, Hammer, Small Item Bag
Main Materials:
[Frame] TPU Tube (recommended psi value 5–6 psi), 6061 Aluminum
[Canopy] Steel
[Fly Sheet] Flame-retardant Polyox
[Inner Tent] Poly Taffeta
[Floor Sheet] Heavy Polyox
[Mesh] Polyester
Performance/Features:
[Fly Sheet] Waterproof treatment, dirt-resistant and super water-repellent treatment, flame-retardant treatment, UV-CUT treatment, looped mud skirt, back door, ventilation
[Inner Tent] Breathable water-repellent treatment, electric cord zip, ventilation
[Frame] 6061 Aluminum, TUBE DIVIDED SYSTEM
- Excellent wind resistance with beam-type air tubes
- Comes with a dedicated pump
- Can be used as a screen when the inner tent is removed

Flame-retardant treatment: Complies with U.S. standard CPAI-84
Recommended psi value: The appropriate value may vary depending on weather conditions and altitude, so please use this as a guideline.
*Assembly time is an estimate based on using the included manual pump for air inflation.
*The included pegs and hammer are designed for use in clear, windless, and leveled environments.
If used in adverse weather or uneven conditions, please seek products suitable for those situations.