Bonfire Pit Sheet (80 x 60 cm)
Fireproof sheet that prevents sparks from the fire floor from falling directly onto lawns and wooden decks. With a heat resistance temperature of approximately 500°C, it is highly resistant to heat, and its wide size allows it to be placed under a BBQ grill. For tabletop grills, fold it in two and lay it on the table to soften the heat and prevent burn marks and scorching. Since fine glass fibers adhere to the surface, please be sure to wear military gloves before handling the product. Touching it with bare skin may cause prickling or skin damage.

When placed under a bonfire pit, it protects lawns and wooden decks from spilled ashes and fire sparks.

Its large size allows it to be set under a BBQ grill.

Spread the sheet over the installation site and secure the four corners with pegs. In places where pegs cannot be used, place stones or other weights on the four corners.

Fold it in two and place it under the tabletop grill to reduce damage to the table.

Size: (approx.) 80 cm (length) x 60 cm (width)
Main material: Fiberglass
Performance/Features:
Fireproof sheet with a heat resistance temperature of 500℃!
Fire pits can be used safely on lawns and wooden decks.
The large size allows it to be set under a BBQ grill.
Fold it in half and set it on a small grill or tabletop grill to create the effect of an insulating sheet.
This product is designed to soften the heat that is transferred to the installation site and is based on the average heat of a "fire pit" with a sufficient distance from the heat source to the ground, such as the Logo Pyramid Grill. Please note that this product does not completely block heat.
This product is made of fiberglass. It has the following characteristics because it is different from common fabrics. Please be assured that this is not a defect.
Please be sure to wear military gloves when handling the product because fine glass fibers are attached to the surface. Touching it with bare skin may cause prickling or skin damage.
The coloring of the fabric may vary from piece to piece due to the special heat treatment used to color the fabric.
The color may become darker in some areas due to the solvent used to make the fabric.
The color may become darker in some areas due to the solvent used to fiber the fabric.
The strength of the fabric around the grommets is different from that of normal fabrics and is delicate. Please do not pull the fabric around the grommets strongly or use the grommets with a lot of force as it may lead to the grommets coming off.
Fireproof sheet that prevents sparks from the fire floor from falling directly onto lawns and wooden decks. With a heat resistance temperature of approximately 500°C, it is highly resistant to heat, and its wide size allows it to be placed under a BBQ grill. For tabletop grills, fold it in two and lay it on the table to soften the heat and prevent burn marks and scorching. Since fine glass fibers adhere to the surface, please be sure to wear military gloves before handling the product. Touching it with bare skin may cause prickling or skin damage.

When placed under a bonfire pit, it protects lawns and wooden decks from spilled ashes and fire sparks.

Its large size allows it to be set under a BBQ grill.

Spread the sheet over the installation site and secure the four corners with pegs. In places where pegs cannot be used, place stones or other weights on the four corners.

Fold it in two and place it under the tabletop grill to reduce damage to the table.

Size: (approx.) 80 cm (length) x 60 cm (width)
Main material: Fiberglass
Performance/Features:
Fireproof sheet with a heat resistance temperature of 500℃!
Fire pits can be used safely on lawns and wooden decks.
The large size allows it to be set under a BBQ grill.
Fold it in half and set it on a small grill or tabletop grill to create the effect of an insulating sheet.
This product is designed to soften the heat that is transferred to the installation site and is based on the average heat of a "fire pit" with a sufficient distance from the heat source to the ground, such as the Logo Pyramid Grill. Please note that this product does not completely block heat.
This product is made of fiberglass. It has the following characteristics because it is different from common fabrics. Please be assured that this is not a defect.
Please be sure to wear military gloves when handling the product because fine glass fibers are attached to the surface. Touching it with bare skin may cause prickling or skin damage.
The coloring of the fabric may vary from piece to piece due to the special heat treatment used to color the fabric.
The color may become darker in some areas due to the solvent used to make the fabric.
The color may become darker in some areas due to the solvent used to fiber the fabric.
The strength of the fabric around the grommets is different from that of normal fabrics and is delicate. Please do not pull the fabric around the grommets strongly or use the grommets with a lot of force as it may lead to the grommets coming off.